Noodles by KG3 - Design Kit
https://noodles.tech/design

GDTF (Vectorworks Spotlight, grandMA3, Depence, and other GDTF apps)
  Noodles-AngelHair.gdtf / Noodles-Spaghetti.gdtf / Noodles-Bucatini.gdtf
  One DMX mode per run length (1, 3, 5, 10 m). Every pixel is its own RGB cell (3 channels).
  A 10 m run is the max and always fits in one universe.

3D models (any CAD or visualizer)
  Straight runs with steel end caps. OBJ in millimetres, GLB in metres, STEP in millimetres.

Capture
  Use Capture's built-in LED Strip fixture (Capture 2026.1 or newer). Settings per model are on noodles.tech/design.

Vectorworks bendable rope
  Noodles Rope.vso: draw any polyline or arc, it becomes the rope with the right diameter,
  and reports length, pixels, channels, universes and watts. Install steps on noodles.tech/design.

Questions: info@kg3.io
